Printronix SL5000E series User Manual page 47

For direct thermal operation (no ribbon required):
•
If you have not run an Auto Calibrate, do so now. See "Running Auto
Calibrate" on page 74.
•
If you have already run an Auto Calibrate, complete the following
steps:
a. Close the media cover.
b. Press the FEED key once to verify that the media advances.
c. Press the PAUSE key to place the printer online.
For thermal transfer operation (which uses a ribbon):
Complete the ribbon loading procedure (see "Loading Ribbon" on
page 53).
Loading Roll Media
47