Printronix SL5000E series User Manual page 232

Chapter 3
Emulation Submenus
Preparser Port
(From page 181.)
•
Disable. Disables the Preparser Command feature.
•
Parallel. Select Parallel if the data is coming to the printer through the
parallel port.
•
Serial. Select Serial if the data is coming to the printer through the serial
port.
The factory default is Disable.
Primary Subset
(From page 184, page 189.) This item allows selection of the desired primary
character subset used by the printer. The factory default is ASCII (USA).
Print Char. Set
(From page 185, page 187, page 189, page 191, page 194.)
Selecting this item by pressing the ↵ key causes the printer to print the
currently selected character set.
Print Errors
(From page 183.)
•
Enable. When enabled, errors that occur print on paper and display on
the panel LCD.
•
Disable. When disabled, the error displays on the panel LCD only.
The factory default is Enable.
Printer PI
(From page 180.)
•
Disable. The LP+ Emulation is configured with the PI line disabled.
•
Enable. The LP+ Emulation is configured with the PI line enabled.
The factory default is Disable.
Printer Select
(From page 190, page 194.)
•
Disable. Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is received, and
enables the printer when a DC3 control code is received.
The factory default is Disable.
232