Printronix SL5000E series User Manual page 242

Chapter 3
Emulation Submenus
Translate Table
(From page 159.)
•
Default. The option is disabled. The table is not stored in the real
translation table until the option is enabled.
•
Downloaded. The option is enabled. The LU3 Translation Table is
loaded from the buffer into the permanent table.
The factory default is Default.
Translation Tbl (Coax, TN3270)
(From page 158, page 170) Prints out SCS and DSC/DSE tables of the coax
interface's current character set. This operation is valid only when the coax
interface is selected as the current interface.
Translation Tbl (SPC Coax)
(From page 164.) Prints out a table of the coax interface's current character
set. This operation is valid only when the coax interface is selected.
Translation Tbl (SPC Twinax)
(From page 165.) Prints out a table of the twinax interface's current character
set. This operation is valid only when the twinax interface is selected.
Translation Tbl (TN5250, Twinax)
(From page 161, page 173.) Prints out a table of the twinax interface's current
character set. This operation is valid only when the twinax interface is the
current interface.
True Vert 1/10
(From page 178.)
•
Disable. When disabled and in High Resolution, a vertical line's length in
one inch and 1/10 inch increments is interpreted as 70/72 inch and 7/72
inch respectively.
•
Enable. When enabled, a vertical line's length is interpreted exactly,
which is 72/72 inch in one inch increments.
The factory default is Disable.
Truncate Alpha
(From page 178.)
•
Enable. Prevents the printing of Error 48 (Element Off Page Error) if
alphanumeric data, including spaces, extends beyond the right side of the
form.
•
Disable.
The factory default is Enable.
242