Printronix SL5000E series User Manual page 233

Prop Line Length
(From page 180.)
•
Enable. The position of the next graphic element will be determined by
the physical length of a text string (when using a proportional spaced
font).
•
Disable. The position of the next graphic element will be determined as if
the font was monospaced (all characters had the same specified width).
The factory default is Enable.
Prop. Spacing
(From page 184, page 187, page 189, page 191, page 193.)
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
•
Enable. The width of each character cell varies with the width of the
character. For example, [i] takes less space to print than [m]. Using
proportional fonts generally increases the readability of printed
documents, giving text a typeset appearance.
•
Disable. Each character cell is printed with the same width. Each column
in the printed text will line up.
The factory default is Enable.
PSeries Dbl High
(From page 185.) This menu option allows printing compatibility between the
current and older models of Printronix printers.
•
Normal. This is normal Double High printing for current model printers.
•
P3/4/6/9 Compat. Where older printers printed two dot rows higher, this
option allows for compatibility by raising the print two dot rows to match
the current models dot row value (two dot rows lower).
The factory default is Normal.
Repeat Form Opt
(From page 176.)
•
Enable. Speeds up the processing of repeated forms for PGL, thereby
resulting in increased printer throughput. This option provides no speed
benefit for forms that are unrelated to one another and should be disabled
under those circumstances.
•
Disable. Should be selected when subsequent forms are unrelated to
one another.
The factory default is Enable.
Overview
233