Printronix SL5000E series User Manual page 208

Chapter 3
Emulation Submenus
Character Set (P-Series, Serial Matrix, Proprinter, Epson FX)
(From page 184, page 189, page 191, page 193.) This item allows selection
of the character set to be used by the printer.
Character Set (PPI2)
(From page 183.) Selects the character set: either PC-850 or PC-8.
The factory default is PC-850.
Cmd Resolution
(From page 179.)
•
Low Resolution. Sets a low command resolution mode.
•
High Resolution. Sets a high command resolution mode.
The factory default is Low Resolution.
Coax Type
(From page 158.) This parameter defines the printer emulation, as follows:
•
4234
•
3287
After the emulation has been changed, a POR status is sent to the host.
The factory default is 4234.
Code Page Subset
(From page 166.) This item allows you to select the desired version of the
following code pages - 037,273, 274, 275, 277, 278, 280, 281, 282, 284, 285,
297, 500, and 871.
The options are Version 0 (the factory default) and Version 1.
Command Prefix
(From page 181.) This item allows you to select the prefix for the control
instructions command.
The range is 1-255, and the factory default is 126.
Compressed Print
(From page 188.) Controls which host command sets compressed printing.
•
Char 01 SOH
•
Char 03 ETX
•
Char 09 HT
The factory default is Char 01 SOH.
208