Printronix SL5000E series User Manual page 228

Chapter 3
Emulation Submenus
Midline PY (includes ^PN)
(From page 179.)
•
Disable. The Graphics mode Enabled command, ^PY, must be the first
three characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
The factory default is Disable.
NL at MPP+1
(From page 158, page 164, page 170.) Specifies the linespacing action when
the printline exceeds the rightmost print position and text continues from the
leftmost print position on a new line.
•
On. Moves to the first print position two lines down from the current
position.
•
Off. Moves to the first print position of the next print line.
The factory default is On.
Null Handling
(From page 164.) This item allows the printer to either treat nulls as blank
spaces or ignore them. If nulls are ignored, the print position does not move.
•
Space. Treats nulls as spaces.
•
Ignore. Ignores nulls.
The factory default is Space.
Null Suppression (Coax, TN3270)
(From page 159, page 170.) This item allows the printer to either treat nulls as
blank spaces or ignore them. If nulls are ignored, the print position does not
move.
•
Off. Ignores nulls.
•
On. Treats nulls as spaces.
The factory default is Off.
Null Suppression (IPDS)
(From page 166.)
•
Disable. When disabled, an exception is generated when the IPDS data
stream contains an 0x00.
•
Enable. When enabled, this option ignores the EBCDIC value 0x00 in the
IPDS data stream.
The factory default is Disable.
228