Printronix SL5000E series User Manual page 200

Chapter 3
Emulation Submenus
Barcode var.
(From page 180.) This command only applies for IBARC barcode command
format.
•
Low Resolution. Sets barcode ratio dot values to be interpreted as line
matrix printer dots (60 x72).
•
High Resolution. Sets barcode ratio dot values to be interpreted as print
engine dots (300 x 300 or 203 x 203).
The factory default is Low Resolution.
Bold
(From page 185, page 188, page 190, page 192, page 194.)
•
Disable. Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
The factory default is Disable.
Bottom Margin
(From page 185, page 187, page 189, page 191, page 194.)
Defined in linespaces, starting from line zero at the bottom of the page and
incrementing from the bottom up.
The range is 0-451 linespaces, and the factory default is 0 linespaces.
Btm Margin Ctl
(From page 178.) Determines the page's bottom margin. If this option is set to
VGL Text Length, then text length changes the bottom margin value in the
LP+ Emulation submenu as follows: bottom = physical page length-top
margin-text length. If the option is set to LP+ Menu, then a change in text
length has no effect, and the bottom margin setting in the LP+ Emulation
menu will be used, although the new text length value still shows in the menu.
The options are LP+ Menu (the factory default) and VGL Text Length.
Buffer Print
(From page 158, page 161, page 164, page 165.)
•
Disable. The printer will print normally.
•
Enable. The printer prints the EBCDIC data and control codes received
from the host as hex values.
NOTE: Use of this parameter may alter print attributes set by the host
The factory default is Disable.
200
computer. A power cycle may be required after changing Buffer Print
from enable to disable.