Printronix SL5000E series User Manual page 209

Control Code 06
(From page 185, page 188, page 190.) Control Code 06 defines the function
of ASCII code 06 hex (ACK). You can select an alternate line spacing of 6.0,
8.0, or 10.3 LPI.
The options factory default is 8.0 LPI.
Control Code 08
(From page 185.) Control Code 08 defines the function of ASCII code 08 hex
(BS). You can define the code to output an Elongated character or a
Backspace. The factory default is Elongated.
Copy Count
(From page 178.) Determines the number of identical copies of each physical
page that will be printed.
The range is 1-999, and the factory default is 1.
CR at MPP+1
(From page 158, page 170.) MPP is Maximum Print Position, which is also
known as line length. This option controls a carriage return at the end of a
print line and at MPP+1.
•
On. Produces a carriage return to the first print position of the next line.
•
Off. Produces a carriage return to the first print position of the current line.
The factory default is On.
CR Edit
(From page 175.) This parameter determines if a carriage return will be
followed by a line feed.
•
Disable. The printer ignores all carriage returns that are not followed by
line feeds.
•
Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
The factory default is Disable.
CR, EM, & NL
(From page 159, page 171.) CR (Carriage Return), EM (Error Message), &
NL (New Line) specify that the printer treat the CR, EM, and NL control codes
either as spaces or as control codes.
•
On. Treats the CR, EM, and NL commands as control codes.
•
Off. Treats the CR, EM, and NL commands as spaces.
The factory default is On.
Overview
209