Standard Features - Printronix SL5000E series User Manual

Chapter 1
The T5000 Series Label Printer

Standard Features

•
Your thermal printer has the standard LinePrinter Plus
which provides direct compatibility with Printronix P-series printers. In
addition, the printer has co-resident IGP
which provide printer system commands for text, barcodes, graphics,
lines, and boxes.
•
Direct thermal printing and thermal transfer (thermal transfer is not
supported on 4 inch DT models).
•
Standard interfaces:
•
•
NOTE: The interface cable needed to connect the printer to the host device is
•
Supports over 20 types of bar codes.
•
Download fonts, forms, and graphics to printer memory.
The standard resident fonts are Letter Gothic Bold (#93779), Courier Bold
(#93952), CG Triumvirate Bold Condensed (#92250), OCR-A (#90993),
and OCR-B (#91409). All other fonts are optional.
•
High resolution printhead for sharp graphics and text.
•
Label Taken Sensor for detecting removal of labels in Tear-Off mode (and
in Peel-Off mode when optional rewinder is installed).
•
Tear-Off mode for positioning the label at the tear-off position and
detecting its removal before printing the next label.
•
Tear-Off Strip mode for printing a specified number of labels and
positioning the last label at the tear-off position.
•
8MB DRAM memory.
•
4MB Flash memory.
•
Auto Label Mapping
Line Matrix printers.
•
Ventless system for operation in environments with airborne particulate
matter without compromising performance.
24
Serial: RS-232 and RS-422
®
Parallel: Centronics -compatible parallel, IEEE
parallel
supplied by the user.
®
for compatibility with programs written for Printronix
®
(LP+) emulation
® ®
/PGL and IGP/VGL emulations
®
1284 compliant