Kerberos Params Submenus; Kerberos Enable; Reset Kerb. Pwd; Kdc Port Number - Printronix SL5000E series User Manual

Chapter 3
KERBEROS PARAMS

KERBEROS PARAMS Submenus

Kerberos Enable

•
Disable. Disables Kerberos authentication in the wireless network
interface.
•
Enable. Enables Kerberos authentication in the wireless network
interface.
The factory default is Disable.
Kerb. Pwd(01–15)
First 15 characters of the Kerberos password (maximum number of
characters is 40).
Kerb. Pwd(16–30)
Characters 31 to 40 of the Kerberos password (maximum number of
characters is 40).
Kerb. Pwd(31–40)
Characters 31 to 40 of the Kerberos password (maximum number of
characters is 40).

Reset Kerb. Pwd

Resets Kerberos password to an empty string.

KDC Port Number

KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used
for Kerberos Communication.
The range is 0-65535, and the factory default is 88.

Clock Skew Units

The options are Seconds and Minutes, and the factory default is Seconds.
Clock Skew (SEC)
Sets the maximum allowable amount of time in seconds (SEC) or minutes
(MIN), as specified by the Clock Skew Units, that Kerberos authentication will
tolerate before assuming that a Kerberos message is invalid.
•
Seconds: The range is 60-900, and the default is 300.
•
Minutes: The range is 1-15, and the default is 5.
NOTE: Whatever submenu is selected in Clock Skew Units will display on the
284
Clock Skew (SEC) menu. For example, if you select Minutes, the
Clock Skew (SEC) menu name will change to Clock Skew (MIN).