Printronix SL5000E series User Manual page 237

Set Text Orientn (TN3270, TN5250)
(From page 171, page 173.) Specifies the direction in which characters are
printed on the page. This allows the printer to print languages which are
printed right to left instead of left to right.
•
Left to Right.
•
Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
The factory default is Left to Right.
SFCC (IGP/VGL)
(From page 178.) This option selects the Special Function Control Code. The
default value is the caret ^ (decimal 94). Valid values are 17 through 255. Run
a configuration printout to determine the currently selected SFCC.
The range is 17-255, and the factory default is 94.
SFCC (PPI2)
(From page 183.) This menu is only present when "User Defined" is selected
in the SFCC menu. Using this menu, the SFCC can be set to any value
between 0x0 and 0xFF.
The factory default is 0x7B.
SFCC Char (SPC Coax, SPC Twinax)
(From page 164, page 165.) Determines what character is printed when an
EBCDIC Logical Not character ¬ (Hex 5F) is received from the host.
•
Set 1 <%>*
•
Set 2 ^^$
•
Set 3 _%_
•
User Defined
The factory default is Set 1 <%>.
SFCC d command
(From page 185.) This menu option is for backward compatibility.
•
Even dot plot. This option interprets the SFCC d command as even dot
plot.
•
Double high. This option interprets the SFCC d command as double
high. Select this option for backward compatibility.
The factory default is Even dot plot.
Overview
237