Skip Cmd Prefix - Printronix SL5000E series User Manual

Chapter 3
Emulation Submenus
SFCC Select
(From page 183.) Use this menu to select the SFCC, SFCC-Separator, and
SFCC-Terminator sets.
•
Auto Select. The printer selects the SFCC set based upon the received
host data.
•
<ESC><LF><NULL> is a predefined set. The ESC character is the
SFCC, the LF is the SFCC-Separator, and the NULL character is the
SFCC-Terminator.
•
{ I } is a predefined set. The { character is the SFCC, the I is the SFCC-
Separator, and the } character is the SFCC-Terminator.
•
User Defined. When you select User Defined, three additional menus
appear in the tree. These menus allow the SFCC, SFCC-Separator, and
SFCC-Terminator to be configured individually.
The factory default is Auto Select.
SFCC Separator
(From page 183.) This menu is only present when "User Defined" is selected
in the SFCC menu. Using this menu, the SFCC-Separator can be set to any
value between 0x0 and 0xFF.
The factory default is 0x7C.
SFCC Terminator
(From page 183.) This menu is only present when "User Defined" is selected
in the SFCC menu. Using this menu, the SFCC-Terminator can be set to any
value between 0x0 and 0xFF.
The factory default is 0x7D.

Skip Cmd Prefix

(From page 175.) Stands for Skip Command Prefix. This parameter
determines if the printer will print any data before a PGL command is
received.
•
Enable. The printer ignores all data before a PGL command.
•
Disable. The printer will print all data before a PGL command.
The factory default is Enable.
Slash 0
(From page 175, page 178.) This parameter allows you to print the numeral
"0" with or without the slash. This option applies to all character sets except
OCR A and OCR B.
•
Disable. Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
The factory default is Disable.
238