Ignore Mode
(From page 176.) This parameter instructs the IGP to ignore the character
selected under the Select Character menu.
•
Disable. The IGP does not ignore any characters.
•
Enable. The IGP ignores the character specified in the Select Character
menu.
The factory default is Disable.
Ignore Spaces
(From page 179.)
•
Disable. Trailing spaces are not deleted from alphanumeric elements in a
graphics pass.
•
Enable. Trailing spaces are deleted from alphanumeric elements in a
graphics pass.
The factory default is Disable.
Ignore Text
(From page 176.)
•
Disable. When disabled, text in normal mode will be printed. Attributes to
be printed depend on the PGL Normal menu setting.
•
Enable. When enabled, any line of text (non-PGL commands) in normal
mode will be ignored.
The factory default is Disable.
IGP100 Compatibl.
(From page 176.) This parameter forces the output to correspond with
IGP-100 printer output in cases where there are differences.
The options are Disable (the factory default) and Enable.
Image Scale
(From page 183.)
•
Enable. When enabled, images are scaled from TEC printer resolution
(306 dpi) to the resolution of the PPI2 printer (300 dpi).
•
Disable. If disabled, scaling will not take place, resulting in images that
are 2% larger than images printed on the TEC printer. Printing is faster
though, and the image keeps the right proportions.
The factory default is Disable.
Overview
223