Printronix SL5000E series User Manual page 240

Chapter 3
Emulation Submenus
SPC Type (SPC Coax Setup)
(From page 164.)
•
PTX NI (Printronix Non-impact). This option causes the printer to not
line wrap at 132 characters.
•
Avatar Comp. This option causes the printer to line wrap at 132
characters despite the current print density allowing more characters per
line.
The factory default is PTX NI.
SPC Type (SPC Twinax Setup)
(From page 165.) Allows you to select a convertor which mimics a specific
type of external protocol convertor:
•
MODE PTX NI for Printronix non-impact
•
MODE 219 for Model 219 protocol convertor
•
MODE P5000 for Printronix protocol convertor
•
MODE IBM for the IBM protocol convertor
The factory default is MODE PTX NI.
Speed CMDs
(From page 183.) This option allows you to choose whether the engine
commands that affect the print/feed speed should be processed or ignored. If
you want to adjust the print/feed speed through the front panel, you can use
this menu to prevent the host commands from overriding these settings.
When you select "Ignore," PPI2 ignores the following commands or command
parameters:
•
the print speed parameter in the XS command. The parameter will have
no effect; the "Print Speed" value as configured in the "MEDIA
CONTROL" menu will be used.
•
the feed speed parameter in the T command. The parameter will have no
effect; the "Slew Speed" value as configured in the "MEDIA CONTROL"
menu will be used.
The factory default is Process.
Standard Sets
(From page 175, page 180.) This item allows you to select various character
sets available from the "Character Group" item.
The options are Standard, Arabic, Cyrillic, European, Greek, Hebrew, and
Turkish Sets.
The factory default is Standard Sets.
240