Printronix SL5000E series User Manual page 239

Slash Zero
(From page 183.)
•
Enable. When enabled, the zero character is overlaid with a slash
character.
•
Disable. If disabled, the zero character does not have a slash character.
The factory default is Disable.
Slashed Zero
(From page 184, page 187, page 189, page 191, page 193.)
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable. Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
The factory default is Disable.
Slew Relative
(From page 188.) "Slewing" is rapid vertical paper movement. This parameter
determines the number of lines slewed (either 1-15 lines or 1-16 lines) when
an EVFU Slew Relative command is received.
The options are 1-15 lines (the factory default) and 1-16 lines.
SPC Char Set
(From page 165.) Allows you to select the print language character set. See
page 165 for the options.
The factory default is 0500 Internat 5.
SPC Null Supp
(From page 164.) SPC Null Supp stands for SPC Null Suppression.
•
Disable. Ignores nulls. The print position does not move.
•
Enable. Treats nulls as blank spaces.
The factory default is Disable.
SPC Space Supp
(From page 164.) This option is only available in Coax SPC emulation and is
used in LU3/DSC/DSE mode only.
•
Disable. Treats nulls and spaces normally.
•
Enable. If the entire line consists of spaces and nulls, the line will be
discarded.
The factory default is Disable.
Overview
239