Printronix SL5000E series User Manual page 243

Twinax Type
(From page 161.) This parameter defines the printer emulation as follows:
•
IPDS 256 Bytes
•
IPDS 1024 Bytes
•
5225
•
4234
After the emulation has been changed, a POR status is sent to the host.
The factory default is IPDS 256 Bytes.
Typeface
(From page 184, page 187, page 189, page 191, page 193.)
•
Letter Gothic. Letter Gothic is a non-proportional font where all of the
characters take up the same amount of space when printed.
•
Courier New. Courier is a non-proportional (monospaced) font where all
characters take up the same amount of space when printed.
•
OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
The factory default is Letter Gothic.
U1/U2 Move CMDs
(From page 183.) This option allows you to choose whether the engine
command to move paper forward (U1) or backward (U2) will be processed or
ignored. When you select "Ignore," the paper will not be moved when either
command is received.
The factory default is Process.
Uniform Fonts
(From page 180.)
•
Disable. The typeface selected while in Extended Graphics Mode will be
cancelled when the graphics pass is complete.
•
Enable. The typeface selected while in Extended Graphics Mode will also
be used in Standard Graphics Mode and Normal Mode.
The factory default is Disable.
UPC Descenders (PGL)
(From page 176.) This parameter allows you to print bar code descenders
when human readable data is not presented in the UPC/EAN bar codes.
•
Always. UPC/EAN bar codes are printed with descenders, even if there
is no human readable data.
•
Never. UPC/EAN bar codes are printed without descenders if the PDF
command is present.
Overview
243