Printronix SL5000E series User Manual page 113

Min. Code Gap
Minimum Code Gap represents the distance between the closest barcodes
within a print job. The distance is measured from the bottom of one barcode to
the top of the next barcode. The closest barcodes can be located on two
separate labels or on the same label. This distance is important because it
affects how fast the Print Speed can be set. If the bottom most barcode on
one label is very close to the top most barcode on the next label, the printer
could have trouble distinguishing which barcode report correlates with which
label. To avoid the risk of miscorrelation, the printer will limit its Print Speed.
The range is 0.15 to 1.00 inch adjusted in .01 inch increments.
The factory default is 0.25 inch.
Skip Labels
This menu allows you to select the number of labels skipped after an
Overstrike occurs. The minimum is 0 to 1 label. The maximum is 1 to 2 labels.
The options are Minimum (the factory default) and Maximum.
F/W Revision
This is a display item only and indicates the firmware version of the validator.
Overstrike Style
This menu allows you to select different overstrike styles on bad labels.
The options are Grid (the factory default), Grey, Checkerboard, and Error
Type Msg.
I2of5 Checksum
This option allows you to include or exclude the checksum option in I2of5 as
part of the grading. For example, if this option is set to Enable, then any
incoming barcode data without checksum digits will be graded as failure and
CHECKSUM FAILURE will display on the LCD.
The options are Disable (the factory default) and Enable.
Num Retry
This option allows you to set a number of retries for overstrike before the
printer stops printing and displays a fault message.
•
3, 4, or 5: The printer stops after the specified number of retry attempts
and displays a descriptive fault message on the LCD. When you clear the
fault message (press the ENTER key with the VALIDATOR menu "Clear
Data" option displayed), the printer stops trying to print the same label
and begins printing the next label.
VALIDATOR Submenus
113