Printronix SL5000E series User Manual page 198

Chapter 3
Emulation Submenus
Auto LF (P-Series, P-Series XQ)
(From page 185, page 187.) This option defines the printer action when print
data is received past the forms width setting.
•
Disable. Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
The factory default is Disable.
Auto LF (Serial Matrix, Proprinter XL, Epson FX)
(From page 190, page 192, page 194.) This option defines the printer action
when print data is received past the forms width setting.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
•
Disable. Discards any data past the forms width.
The factory default is Enable.
Auto Skip at End
(From page 159, page 170.) Specifies whether to perform an automatic form
feed at the end of a print buffer. If form feed is the last character in the print
order, the form feed function is supplied by the Auto Skip At End option.
•
Off. Sets the printer to print at print position 1 of the next line.
•
On. Sets the printer to print at print position 1 of the first line of the next
form.
The factory default is Off.
Auto Uppercase
(From page 175.) This parameter enables the printer to print text in all
uppercase when using the ALPHA command.
•
Disable. The printer will print text in upper and lowercase.
•
Enable. The printer will print text in uppercase only.
The factory default is Disable.
Autoeject (PGL)
(From page 176.) If the last page of a job is not full, that is, the data does not
fill the entire page, you can instruct the printer to eject the page or to stop and
hold the page at the last print position.
•
Disable. The printer does not eject the last page unless you send a Page
Eject command or until the printer receives another print job.
•
Enable. The printer ejects the last page after the entire job has been
processed and printed.
The factory default is Disable.
198