Printronix SL5000E series User Manual page 224

Chapter 3
Emulation Submenus
Intervention Req
(From page 158, page 164, page 170.)
•
Send To Host. The printer sends a signal to the host computer when a
printer fault or hold mode time-out occurs.
NOTE: If you select Send To Host, make sure the Error Recover option
•
Do Not Send. No signal will be sent to the host computer.
The factory default is Send To Host.
IS Label Fmt
(From page 182.) The ^IS command saves the printed label image by name
for later recall as part of a label definition. The IS Label Fmt option determines
the internal format to be used for storing the label image: list format or bit
format.
•
List Format. Should be used for most applications due to its greater
efficiency of data process.
•
Bitmap Format. Should be used in applications that frequently recall the
saved label image, in which case the bitmap storage format provides the
better print speed.
The factory default is List Format.
Italic Print
(From page 184, page 187, page 189, page 191, page 193.)
•
Disable. Text is printed normally.
•
Forward Slant. Text is printed with a forward slant.
•
Backward Slant. Text is printed with a backward slant.
The factory default is Disable.
Label Buf Size
(From page 181.)
This option allows you to set the label buffer size.
The buffer is used to store the data from ^XA up to ^XZ for command
processing. The maximum size of the buffer cannot exceed the amount of
available memory in the system. If a menu value is selected which is greater
than the amount of memory available, the menu value will be set to the
amount available. To increase the amount of available memory, increase the
Glob Mem Adjust setting (under the PRINTER CONTROL menu).
Also, the new buffer size only takes effect upon power-up, so do a Save
Config. for the new setting and select that config as the Power-up.
The range is 160K Bytes to 3600K Bytes, and the factory default is
560K Bytes.
224
(under MEDIA CONTROL) is set to Disable. If Error Recover is not
set to Disable, Intervention Req will not work properly.