Printronix SL5000E series User Manual page 370

Appendix F
Zebra Xilll Series
Set Date (opt)
mm/dd/yy
dd/mm/yy
Set Time (opt)
24 hour
12 hour
IP Resolution (opt) -
Dynamic* - Server selects IP Address.
Permanent - User selects IP Address.
IP Protocols (opt) - (All*, Gleaning only,
RARP, BOOTP, DHCP).
If Dynamic set in IP Resolution, this selection
determines method(s) that the PrintServer
will receive the IP Address from the server.
Subnet Mask (opt) -
Dynamic - User may set, but server can
assign.
Permanent* - User must set.
Default Gateway (opt) -Sets Gateway
Address.
Print Speed - N/A in menu. Selected via
software sent from host.
Orientation - N/A in menu. Selected via
software sent from host.
370
Table 32: PPI1 Menu (continued)
T5000e with PPI1 Emulation
N/A
N/A
N/A
N/A
ETHERNET ADDRESS Menu, (opt)
Subnet Mask - User sets Subnet Mask for TCP/IP
protocol un less it is Dynamic, then read-only.
ETHERNET ADDRESS Menu, (opt)
Gateway Address - Sets
Gateway Address.
QUICK SETUP Menu,
Print Speed - (2 to 10 ips). Printer width & model
dependent. Also, selectable via software sent from host.
QUICK SETUP Menu,
Orientation - Portrait*, Landscape, Inv-Portrait, Inv-
Landscape.