Set Substitution
When this option is activated, the character set overlay in RAM is
activated. This can also be accomplished through a host command
of SFCC RX. In either case, a flag is set indicating that the
substitution table is active. If the power-up configuration has Ld Set
at Pwrup and Set Substitution both enabled, the character set
overlay is automatically activated at power-up or during a soft reset.
See the LinePrinter Plus Programmer's Reference Manual for more
information.
Barcode X-Offset
•
Disable (default)
•
Enable. Allows text to print next to a barcode when xxxx and
yyyy are not set to the origin.
LinePrinter Plus Emulation
SPC Twx Params
189