Printronix P5005B User Manual page 309

Table 17. LCD Message Troubleshooting Table
Can User
Displayed Message
Correct?
DO NOT POWER No
OFF
DRVR CIR BAD* No
EXHAUST FAN FLT Yes
(Cabinet model only)
FIRMWARE No
ERROR*
Explanation
This is a standard Do not power off the
warning message printer until downloading
that displays while is complete.
the printer is
downloading
software.
Hammer coil count Contact your authorized
test failed.
service representative.
Sensors cannot Power off the printer and
detect current in remove the paper path
fan circuit. (see Maintenance
Manual). Check that the
fan cable connector is
connected. Check for
obstruction of vents and
fan airway, and remove
any obstructions. Check
for items beneath the
printer blocking cabinet
vents. Power back on the
printer. If this message
recurs, contact your
authorized service
representative.
Application Contact your authorized
software tried to
service representative.
perform an illegal
printer function or
damaged memory
detected on board.
Fault Messages
Solution
1
1
1
309