Printer Control - Printronix P5005B User Manual

PRINTER CONTROL

PRINTER
CONTROL
(from page 99)
Unidirectional PMD
Fault
Disable* Enable*
Enable
Disable
Tear Bar Shuttle
2
Dist.
Timeout
5.12 inches.* 5 Seconds*
(4.5 - 10.5)
(1-60 seconds)
Unidirectional
The Unidirectional feature affects both print quality and printing
speed. By setting this feature, you can configure the printer to print
in both directions of the shuttle sweep (bidirectional), or to print in
one direction only (unidirectional).
•
Disable (default). The printer will print all data in both directions
of the shuttle sweep (bidirectional printing). This choice
produces higher printing speed.
•
Enable. The printer will print all data in only one direction of the
shuttle sweep (unidirectional printing). Although enabling this
feature reduces print speed, it enhances the vertical alignment
of dots and produces cleaner, sharper barcodes and text.
Open Platen Slow Paper
Slew
@BOF
Disable* Disable*
Enable Enable
Bar Code Print Line
1
Quality Select
Draft* Bar Code Detect*
Dark Graphics Detect
Recommended Dual
Single
Upper*
Lower
Diagnostics
PRINTER CONTROL
ETHERNET PARAMS
* = Factory Default
1
= P5000 Series Models only
2
= P5224 Model only
Power Saver Pwr Save
Time Control
15 minutes* Enable*
(3 min - 240 min) Disable
Instant
(5 sec - 10 min)
267