Printronix P5005B User Manual page 61

Figure 44. Matching the Forms Thickness Lever to the Paper Thickness
7. Lower the forms thickness lever. Set it to match the paper
thickness. (The A-B-C scale corresponds approximately to
1-, 3-, and 6-part paper thickness.)
NOTE: Do not set the forms thickness lever too tightly; excessive
friction can cause paper jams, ribbon jams with potential for
ribbon damage, smeared ink, or wavy print.
8. Press CLEAR to remove any fault messages (such as "LOAD
PAPER") from the message display.
9. Press SET TOF. The top-of-form position you have set moves
down to the print position.
10. Press ON LINE to place the printer in online mode.
Set The Top-Of-Form Procedure
Forms Thickness Lever
Procedure
61