Table of Contents
Advertisement
Chapter 4
LinePrinter Plus Emulation
Epson FX Emulation
Printer
Protocol
(from page 181)
Epson FX
Define CR
Auto LF
Code
CR = CR*
Enable*
CR = CR + LF
Disable
Alt. Set
80-9F
Control Code*
Printable
Define CR Code
The Define CR Code option controls the action of the printer when it
receives a Carriage Return code (hex 0D) from the host computer.
If this feature is enabled, each time the printer receives a carriage
return, it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return.
208
Define LF
Printer
Code
Select
LF = LF*
Disable*
LF = CR + LF
Enable
* = Factory Default
Character
20 CPI
Condensed
Set
(see page 211) Enable*
Disable
Advertisement
Table of Contents
