Ascii Data Port; Keep Alive Timer - Printronix P5005B User Manual

You may also enable or disable the Novell or NetBIOS Protocols
within this menu, as well as selecting which Novell Frame scheme
to use in processing Novell signals. See the Novell chapter in the
Network Interface Card User's Manual for more details.
If the printer is connected to a remote management software utility,
the PPM Port Number must match the setting in the remote
management software. See the Remote Management Software
User's Manual for details.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be
available. The selections are as indicated below:
•
Enable (default). Makes the NetBIOS protocol available with
the ethernet installed.
•
Disable. Makes the NetBIOS protocol unavailable during
printer operation.

ASCII Data Port

This option sets the port number for ASCII print jobs. The data port
number needs to match your host system setting.
•
9100 (default)
•
0 - 65535
IPDS Data Port
This option allows you to set the port number for IPDS print jobs
only if the IPDS option is installed.
The range is 0 - 5000, and the factory default is 5001.

Keep Alive Timer

This is the time that the Keep Alive Timer will run. With the Keep
Alive Timer on, the tcp connection will stay connected even after
the print job has terminated.
•
3 Minutes (default)
•
2 - 10 Minutes
ETHERNET PARAMS
265