Printronix P5005B User Manual page 163

Set Text Orientn
Specifies the direction in which characters are printed on the page.
This allows the printer to print languages which are printed right to
left instead of left to right.
•
Left to Right (default).
•
Right to Left. When a right to left language is selected, the
host will be notified of print direction changes when the printer
is put online.
Intervention Req
Select from the following:
•
Not Send To Host
•
Send To Host (default). The printer sends a signal to the host
computer when any of the following occur:
•
Printer faults occur.
•
Hold mode time–out occurs.
If not selected, the printer will only send the signal on printer faults
that cause data loss (paper jam, ribbon stall, online platen open,
etc.).
Compatibility Op
The Compatibility Options allow you to select special printer
functions in the non-SCS mode based on the capabilities of the
printer emulated.
CR At MPP+1
MPP is Maximum Print Position, which is also known as line length.
This option controls a carriage return at the end of a print line and at
MPP+1.
•
On (default). Produces a carriage return to the first print
position of the next line.
•
Off. Produces a carriage return to the first print position of the
current line.
3270 Params
163