Control Code; Define Cr Code - Printronix P5005B User Manual

Control Code 08

Control Code 08 defines the function of ASCII code hex 08 (BS).
You can define the code to output the following character:
•
Elongated (default).
•
Backspace.

Define CR Code

This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a carriage return,
it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends Line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
Auto LF
This option defines the printer action when print data is received
past the forms width setting.
•
Disable (default). Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width, causing the excess
text to print on the next line.
P-Series Emulation
191