Printronix P5005B User Manual page 162

Chapter 4
Coax/Twinax (CTHI) Emulation
Usr Defined HTRN
This option is used to set user defined lead-in characters. The
range is ASCII character. This option allows users to define ther
own lead-in characters for the Printronix Specific commands.
Select a hex value for the following codes for the User Defined
option:
•
Start Code 1 5F (default)
•
Start Code 2 5F
•
Stop Code 5B
Alt. Set 80-9F
•
Printable (default). Prints data in the range of hex 80 through
hex 9F.
•
Control Code. Interprets data in the range of hex 80 through
hex 9F as a control code.
Change Case
Specifies the font as Mono or Dual case. This option is available
only in non-SCS mode. The host will be notified of the change when
the printer is placed online. Mono Case prints the same as Dual
Case if the character set is one of the following "right to left" sets:
Katak., Hebrew, Old Hebrew, and Farsi.
SCS (System Network Architecture Character String) mode is
controlled by the host computer.
•
Dual Case (default)
•
Mono Case
162