Table of Contents
Advertisement
Chapter 3
Operational Procedures
Replacing The Ribbon
1. Press ON LINE to place the printer in offline mode.
2. Open the printer cover.
Figure 60. Removing the Old Ribbon
3. Remove the old ribbon:
a. Raise the forms thickness lever as far as it will go.
b. Press in on the hub latches and lift the ribbon spools off the
c. Lift the ribbon out of the ribbon path.
4. Discard the old ribbon.
5. If necessary, clean the interior of the printer. (See "Cleaning
Requirements" on page 297.)
84
Forms Thickness Lever
Hub Latches (2)
hubs.
Advertisement
Table of Contents
