Proprinter Xl Emulation - Printronix P5005B User Manual

Chapter 4
LinePrinter Plus Emulation

Proprinter XL Emulation

Printer
Protocol
(from page 181)
Proprinter
XL
Define CR Auto LF
Code
CR = CR* Enable*
CR = CR + LF Disable
20 CPI
Condensed
Enable*
Disable
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return.
204
Define LF FF valid at
Code TOF
LF = LF* Enable*
LF = CR + LF Disable
* = Factory Default
Character Alt. Char
Set Set
(see page 207) Set 1*
Set 2