Report Status; Centronics (Parallel) Submenu - Printronix P5005B User Manual

Timeout
This is the value used by the printer to time out from the current port
and check the other selected port types for data to print. When the
printer has not received data from the host after a certain period of
time, it needs to timeout in order to service the other ports.

Report Status

•
Disable (default). When a fault occurs on the printer, only the
active port reports the fault to the host.
•
Enable. The port will report any fault even when it is not the
current active port.

Centronics (Parallel) Submenu

Centronics
(from page 236)
Data Bit 8 PI Ignored
Enable* Enable*
Disable Disable
Prime TOF Action
Signal
Enable* Reset*
Disable Do Nothing
Centronics (Parallel) Submenu
Data Resp.
Polarity Polarity
Standard* Standard*
Inverted Inverted
Buffer Size Auto
in K Trickle
16* Disable*
(1-15) Enable
* = Factory Default
Busy on Latch Data
Strobe On
Enable* Leading*
Disable Trailing
Trickle
Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
239