Host Interface - Printronix P5005B User Manual

Chapter 4

HOST INTERFACE

HOST INTERFACE
HOST
INTERFACE
(from page 99)
Twinax Coax
(Available with (Available with
CT Option) CT Option)
IEEE 1284* E-Net
Adapter
(see page 254) (see page 256)
The Host Interface Menu enables you to select and configure one
of many types of interfaces between the printer and your host
computer. The currently selected interface is indicated with an
asterisk on the control panel message display. Each interface has
its own submenu with a set of interface parameters which can be
configured.
IMPORTANT
When switching between Twinax, Coax, or Auto Switching, the
printer will load the power-up configuration and the new
interface parameters. Any settings made and not saved before
selecting these interfaces will be lost.
236
* = Factory Default
1
Factory default if Adapter is present without the Ethernet
2
Factory default if Ethernet is present
Auto Centronics
Switching
(see page 239) (see page 243) (see page 246)
(see page 237)
2
Ethernet
1
(see page 257)
Dataproducts Serial