Printronix P5005B User Manual page 71

1. Raise the printer cover. Raise the forms thickness lever as far
as it will go. (See Figure 4 on page 24 for the location of the
lever.)
2. Press CLEAR to turn off the alarm. Do not open the tractor
doors or remove the existing paper.
3. For cabinet models, open the front door. Align the paper supply
with the label on the floor. Ensure the paper pulls freely from
the box.
4. Feed the paper up through the paper slot (see Figure 47). It
may be easier to feed one corner of the new paper up through
the slot first. When this corner can be grasped from the top,
rotate the paper back to the normal position.
NOTE: If you are using thick, multi-part forms and are unable to
load the new paper over the existing paper, go to step 14.
5. Hold the paper to prevent it from slipping down and through the
paper slot.
Reloading Paper
71