New Ribbon - Printronix P5005B User Manual

Chapter 4
RIBBONMINDER
If the printer is configured to FAULT ON PAPER OUT, when 5%
usable ink appears, it will display the following message:
RIBBON INK LOW
RIBBON INK OUT
CHANGE RIBBON
NOTE: Once you have set up options for RibbonMinder, it will work
RIBBON-
MINDER
(from page 99)
New
Ribbon
Press ENTER
to reset ribbon
life to 100%.

New Ribbon

If the NEW RIBBON DETECT function is disabled, this provides a
means to manually set the printer when a new ribbon has been
installed. The ribbon life displayed on the control panel (if active)
sets to 100%. The count internal to the printer also resets, and the
tabulation towards end of ribbon life begins.
276
without attention.
Ribbon Ribbon
Action Type**
Disable* Gold Series 90*
Display Gold Series 50
Fault Immed. Gold Series 30
Fault Paper Out Gold Ser. 2000
Printronix 100
Note: The
Printronix 60
factory default
for the 500/
1000/1500/ Note: Gold Ser.
2000s models is 2000 is for
Disable. The P5224 only.
factory default
for the P5224 is
Display.
* = Factory Default
**Defaults:
Cab - Gold Ser 90
Ped - Gold Ser 30
P5224 - Gold 2000
Ribbon New Rib.
End Point Detect
Normal* Enable*
Reduce 5% Disable
...(by 5%)
Extend 100%
...(by 5%)
Extend 5%
Reduce 100%