Table of Contents
Advertisement
Chapter 3
The Control Panel
ENTER
When navigating the configuration menus, ENTER selects the
currently displayed option value as the active value. An asterisk (*)
appears next to the active value on the display. ENTER is also
used for starting and stopping printer tests and generating a
configuration printout.
NOTE: The ENTER key must be unlocked in order to function.
UP or DOWN (
Moves up or down between levels in the configuration menus and
makes vertical forms adjustment. After pressing VIEW, press
>
to adjust the paper up or down in 1/72 inch increments for fine
vertical forms alignment. When the printer is in offline mode, press
=
or
UP + DOWN (
Locks and unlocks the ENTER key.
NOTE: The ENTER key lock and unlock function can be
PREV or NEXT (
Moves between the options on the current level of configuration
menu. In the configuration menu, press
press
level.
PREV + NEXT (
When both keys are pressed simultaneously, the printer will reset to
the power-up configuration and reset its internal state.
68
See UP + DOWN, below.
The ENTER key lock and unlock function can be
configured to be a key combination other than
(see page 232).
=
>
or
)
>
to move through levels in the configuration menus.
=
>
+
)
configured to be a key combination other than
(see page 232).
;
<
or
)
<
to scroll forward through the menu selections on the same
;
<
+
)
=
>
+
=
or
=
>
+
;
to scroll backward or
Advertisement
Table of Contents
