Host Override - Printronix P5005B User Manual

Chapter 4
Coax/Twinax (CTHI) Emulation
CR, EM, and NL (3287 only)
CR (Carriage Return), EM (Error Message), and NL (New Line)
specify that the printer treat the CR, EM, and NL control codes
either as spaces or as control codes.
•
On (default). Treats the CR, EM, and NL commands as control
codes.
•
Off. Treats the CR, EM, and NL commands as spaces.

Host Override

Determines whether the printer accepts certain commands sent by
the host, or continues to use the current operator panel settings.
•
Disable (default). Allows these host commands to override
operator panel settings: line length, forms length, lines per inch
(LPI), characters per inch (CPI), print quality, and text
orientation. Note the information appearing on the message
display may not match the data stream setting. No values will
change upon initial selection of the disable option.
•
Enable. The operator panel settings override the host
commands.
166