Adapter Params; Novell Protocol; Nest Serv Type - Printronix P5005B User Manual

Chapter 4
NETWORK SETUP MENU

ADAPTER PARAMS

ADAPTER
PARAMS
(from page 258)
Novell Nest Serv
Protocol Type
Enable* Auto*
Disable Bindery
NDS
Keep Alive Ethernet
Speed
Timer
Auto Select*
3 Minutes*
10 Half Duplex
2 - 10 Minutes
10 Full Duplex
100 Half Duplex
100 Full Duplex

Novell Protocol

This option determines whether the Novell protocol will be
available. The selections are as indicated below:
•
Enable (default). Makes the Novell protocol available with the
ethernet installed.
•
Disable. Makes the Novell protocol unavailable during printer
operation.

Nest Serv Type

You can change the Nest Server using this option, but consult your
administrator for the appropriate setting.
The options are Bindery (the factory default), NDS, and Auto.
260
NetBIOS
Novell
Protocol
Frame
Enable*
Auto Sensing*
Disable
Ethernet II
Ethernet 802.3
Ethernet 802.2
802.2 Snap
Job Control
Standard*
Enhanced
Off
* = Factory Default
ASCII
Data Port
9100*
9099 - 9101