Set Black Mark Sensor As Media Sensor And Calibrate The Black Mark Sensor - Printronix T600 Administrator's Manual

5.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor

Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns green/amber after 5 green blinks. (Any green/amber will do during the
5 blinks).

The LED will be changed as following:
Green  amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5 blinks)
 red/amber (5 blinks)  solid green
Release button
- 35 - P180043-001_A