Ext Execute Copy - Printronix P5005B User Manual

Chapter 4
IGP/PGL Emulation

Ext Execute Copy

•
•
Barcode
Options
(from page 108)
UPC Optimized
Descenders Ratio
Always* Disable*
Never Enable
Only with PDF
112
Disable (default). Dynamic data and overlay data are not
allowed if the optional Form Count parameter (number of forms
to print) is specified as part of the Execute command. (This
setting is IGP-100 compatible.)
Enable. Only dynamic data is allowed within a form in which
the Form Count parameter is specified in the Execute
command. In this case, the exact same form (with identical
dynamic data, etc.) is printed for the Form Count. However,
incremental data is not incremented since the page that is
printing is exactly the same. Also, each form is printed on a
separate page.
I-2/5
Selection
Leading Zero* Disable*
Trailing Space Enable
X2 DPD
Modulo 7 CD
* = Factory Default
AI 00 Select SO
Spaces Char
14*
(0-255)
User-Def
Ratio
Enable*
Disable