Define Lf Code - Printronix P5005B User Manual

Chapter 4
LinePrinter Plus Emulation
Overstrike
This option enables you to print bold characters.
•
Enable (disable). Turns on bold print. When enabled,
overstrike printing slows down the printer.
•
Disable. Turns off bold print.

Define LF Code

•
LF = CR + LF (default). Forces an automatic carriage return
with each line feed command. The next print position is print
position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return. The
next print position will be the current print position of the next
line.
Select SFCC
This parameter allows you to select which ASCII codes will function
as the Special Function Control Code (SFCC) command delimiter.
P-Series codes can use hex 00 through hex 7F. Options include the
following:
•
ESC (hex 1B)
•
SOH (hex 01)
•
ETX (hex 03)
•
CIRCUMFLEX (hex 5E)—also called caret (^)
•
TILDE (hex 7E)—(~)
NOTE: SOH, ETX, and ESC are non-printables. The characters (^)
192
and (~) are printable; however, do not use them as
printables in the host data stream if either is chosen as a
delimiter because print errors will occur.