Select Lpi; Auto Uppercase - Printronix P5005B User Manual

Select LPI

This is the number of lines to be printed per inch. For example, at 6
lpi there is 1/6 inch from the top of one print line to the top of the
next print line. The options are:
•
6.0 (default)
•
8.0
•
9.0
•
10.0

Auto Uppercase

This parameter enables the printer to print text in all uppercase
when using the ALPHA command.
•
Disable (default). The printer will print text in upper and
lowercase.
•
Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a
PGL command is received.
•
Enable (default). The printer ignores all data on the current line
before an IGP command.
•
Disable. The printer will print all data on the current line before
an IGP command.
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when
the printer is powered on.
•
Enable (default). The PGL is enabled when the printer is
powered on. (The PGL feature is initialized in the Normal
mode.)
•
Disable. The PGL is disabled when the printer is powered on.
(The PGL feature is initialized to the Quiet mode.)
IGP/PGL Submenu
111