Printronix P5005B User Manual page 80

Chapter 3
Operational Procedures
Figure 56. Adjusting the Forms Thickness Lever
27. Lower the forms thickness lever. Set it to match the paper
thickness. (The A-B-C scale corresponds approximately to
1-, 3-, and 6-part paper thickness. Adjust until you have the
desired print quality.)
28. Press CLEAR to clear any fault messages (such as "LOAD
PAPER") from the LCD.
29. Press SET TOF. The top-of-form you have set moves down to
the print position. If there is data in the buffer, the paper moves
forward to the last print position on the next page.
30. Press ON LINE and close the printer cover.
80
Forms Thickness Lever