Printronix P5005B User Manual page 46

Chapter 2
Install Basic Components
Left Hub
Figure 27. Threading the Ribbon around the Ribbon Guide
6. Thread the ribbon around the ribbon guide and along the ribbon
path. Be sure to thread the ribbon between the hammer bank
cover and the ribbon mask. (See page 24.)
7. Place the empty spool on the left hub.
8. Press the spool down until the hub latch snaps into place.
9. Turn the left spool by hand to make sure the ribbon tracks
correctly in the ribbon path and around the ribbon guides.
NOTE: The P5224 printer automatically winds the leader onto the
46
spool, once the printer is set online and the next print job is
received.
Ribbon Guide