Connect The Interface And Power Cables; Cabinet Models - Printronix P5005B User Manual

Connect The Interface And Power Cables

Before you connect the interface and power cables, make sure the
voltage source at the printer site conforms to the requirements
specified in "Power Requirements" on page 19.

Cabinet Models

Strap
Figure 18. Unpacking Printer Accessories
1. Make sure the printer power switch is set to O (Off).
2. Open the cabinet front door and cut the strap that secures a
box which contains the power cord, printer ribbon, control panel
overlay labels, and documentation.
3. Open the box and remove the power cord, overlays, and
documentation.
Cabinet Models
37