Printronix P5005B User Manual page 73

Figure 49. Setting the Forms Thickness Lever
9. Lower the forms thickness lever. Set it to match the paper
thickness. (The A-B-C scale corresponds approximately to
1-, 3-, and 6-part paper thickness.)
NOTE: Do not set the forms thickness lever too tightly; excessive
friction can cause paper jams, ribbon jams with potential for
ribbon damage, smeared ink, or wavy print.
10. Press CLEAR to remove the "LOAD PAPER" fault message
from the display.
11. Press PAPER ADVANCE several times to make sure the paper
feeds properly beyond the tractors and over the lower paper
guide. Feed sufficient paper to ensure the paper stacks
correctly.
12. Close the printer cover. Close the cabinet front door.
13. Press ON LINE to place the printer in online mode and resume
printing.
Reloading Paper
Forms Thickness Lever
73