Table of Contents
Advertisement
Chapter 2
Remove Packing Materials
Cardboard
Packing (2)
Figure 6. Removing the Sample Configuration Printout - P5000 Series Models
3. Remove the cardboard packing.
4. Open the tractor doors.
5. Push the tractor locks down.
6. Slide the tractors outward as far as they will go.
7. Raise the forms thickness lever to the fully open position.
8. Remove the envelope containing the sample configuration
printout.
9. Store the envelope in the pouch attached to the left interior side
of the cabinet.
26
Envelope
Forms
Thickness Lever
Advertisement
Table of Contents
Need help?
Do you have a question about the P5005B and is the answer not in the manual?
Questions and answers