Changing Parameters Example - Printronix P5005B User Manual

Chapter 4
Configuration Overview

Changing Parameters Example

OFFLINE
CONFIG.
. . .
CONTROL
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration
menu above, and in all the configuration menus in this chapter, the
factory default values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the
default settings. This section provides an example procedure for
changing individual parameter values.
The following procedure shows how to change and save the
settings for the Slow Paper Slew and Power Saver options. Use
these guidelines to navigate the configuration menus and change
other parameters.
92
PRINTER
CONTROL
Unidirectional PMD Fault
Disable*
Enable*
Enable Disable
Power Saver Tear Bar
Time Distance
15* - 60 Min. 5.12 in.*
Instant (4.5-10.5 in.)
* = Factory Default
Open Platen Slow Paper
@ BOF Slew
Disable* Disable*
Enable Enable
Shuttle Bar Code
Timeout Quality
5 sec.*
Draft*
(1-160 sec.) Dark
Recommended