Viewing The Time Information Screen - NorthStar 961 Reference Manual

Chapter 13 - Customizing Setup Functions
Saving and
restoring your last
saved demo
position
Using the resume
Cancelling demo
mode

Viewing the time information screen

Page 13-72
You can set demo mode to always start at the same position
rather than defaulting to your most recent position fix: Enter
the desired LATITUDE, LONGITUDE, COURSE, and SPEED
fields in the red/green box at the bottom of the SETUP DEMO
MODE screen, then press the SAVE key. You can now start
demo at any time at the same position, course, and speed
settings: if you're not already in demo mode, press the START
key; if you're already in demo mode, press the RESUME key.
Now that you're in demo mode, when you return to the
SETUP DEMO MODE screen, if you change your position,
course, and speed settings, you can always press the
RESTORE key to restore your last saved position, course, and
speed settings.
Note that the RESTORE key appears on the SETUP DEMO
MODE screen only after you've pressed the SAVE key.
The RESUME key appears on the SETUP DEMO MODE screen
only if you're already in demo mode and you've returned to
key
the SETUP DEMO MODE screen. If you now make any
changes in the demo setup, such as changing speed, for
example, you must press the RESUME key to accept the
change; otherwise, if you just press the CHART function key,
you'll end up going at the same demo speed as before.
To cancel demo mode at any time, press the CANCEL DEMO
key. Note that the CANCEL DEMO key appears on the SETUP
DEMO MODE screen only after you've pressed the START
DEMO key. To leave the SETUP DEMO MODE screen and
return to the main SETUP MENU screen, press the RETURN
key.
The TIME INFORMATION screen displays:
• today's date
• current time (in the selected time zone)
• local sunrise time (at your present vessel position)
• local sunset time (at your present vessel position)
961/962 Operations and Reference Manual, Rev. A