NorthStar 961 Reference Manual page 118

Chapter 4 - Understanding the Chart Screen
Page 4-26
Adding points to an already displayed route
1. At the CHART screen, move the cursor to the desired next
point of the route displayed on the CHART screen, then
press the CURSOR menu key.
2. Press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears,
supplying a default waypoint name, and also showing the
name of the currently displayed route.
Store as a waypoint (for on-chart route) dialog box
3. If desired, use the KEYPAD to change the default
waypoint name; if not, press the ADD TO END OF ROUTE
key.
The CHART screen appears, showing the added route
waypoint.
To continue adding route waypoints, keep moving the
cursor to each desired location on the CHART screen,
then press the CURSOR key, STORE AS WAYPT/ROUTE
key, and ADD TO END OF ROUTE key (you may name
each new waypoint or use the default names).
961/962 Operations and Reference Manual, Rev. A